Plastic scarper i,4mm View larger

LB10 : Plexiglas scraper


New product

0/5 - 0 reviews

5.55 CHF

Add to wishlist

Reviews (0)

No customer reviews for the moment.

Add Review

Foire aux questions (FAQ)

    What are the benefits of brushing before and after waxing and why are the ski-bases structured?

    Before waxing: the use of a hand brush or a rotating brush, ideally in very fine bronze bristles, allows the cleaning of the bases even to the depth of their fine structures. This energetic brushing also produces a texture favorable to the impregnation of the wax.

    After waxing (and scraping the wax if it is hot waxing): brushing is ideally done with a hand brush or rotating horsehair. This releases the structure of the base and polishes the wax.

    Note that the ski-bases are not smooth but have fine longitudinal structures that reduce adhesion especially on wet snow. The structures will be less deep for the cold snows and more for the wet snows. Waxing, especially hot, fills these structures you need to release by vigorous brushing.

    For universal use we strongly advise against deep structures that interfere with the handling of skis and snowboards.

    If, during the maintenance of the ski base, you see structures on the edge, their disposal by sanding with a long diamond file, used with a guide of fall, is essential for a good functioning of the skis and snowboards.

    As spring approaches, should skis be waxed with an outdoor temperature wax above zero?

    Yes, when temperatures go up, it is recommended to wax your skis with a wax for positive temperature, because they are softer waxes that slide better on the wet snow.

    When air and snow temperature are cold, the crystals are getting abrasive, so the wax should be harder. A soft wax slips badly and wears quickly on cold snows. It is interesting to know that even if the air is warm, the temperature of the snow never exceeds zero degrees Celsius.

    How to repair the damage to the ski-bases and snowboards?

    There are two main methods:

    • Repair sticks that must be lit so that the material flows in small drops in the holes and scratches of the ski-base.
    • Stick-guns.

    After cooling, the excess material (oversize) must be scraped, or grated with a plastic or steel scraper.

    Should new skis or snowboards be waxed before their first use?

    On a new ski or snowboard, it’s good to do 5 to 7 hot waxings (the first 5 to 7 days).